(no subtitles available on this one, sorry)

A young man from Kiandutu slums in Thika had always wanted to be an electrical engineer, but lack of fees denied him a chance to further his studies. And yet this has not dampen his resolve to put his mark on the world of electrical engineering.For starters, he has devised a way of making wooden extension cables, which as NTV’s Jane Ngoiri reports, is causing quite a stir in his neighbourhood. (src)

A max current set by the fuse and wooden frames that may easily burn or conduct electricity while wet probably aren’t the best conditions for this hardware hack, but hey: there’s obviously a demand for such an extension cable.

Joseph Omwoyo, a young Kenyan form-four student in Western Kenya, did just that and built his own version, using locally available materials. It doesn’t fly, nor does it look like it will ever take off – but what really matters is that a young boy with limited resources still had the energy to fulfill his dream:

“…Omwoyo says he got the idea while in Form One when he, together with his colleagues, toured the Kisumu Airport, and – during the short time there – the idea of making a chopper stuck to his mind”.

We’re sure that Kenya isn’t the only place where people are trying to build their own aircrafts, BUT! this certainly reminds us of the Kahawa West Aircraft story back in October 2010.

For Joseph, the helicopter may be his own escape from reality, or in his words: “Emargence Door Exit”. Touché!

Update: the original video has been removed by NTVKenya, so we can only hope it will be uploaded again in the next few days.

These are the kinds of stories and projects that you just can’t make up. We’ve written about Nigerian Mubarak Abdullahi’s home made helicopter a couple years ago from old car parts. It appears that 3 Somaliland men built a helicopter too, using scrap metal and an old van engine.

Much like the Nigerian one, there is no video footage of this one flying. It’s not easy to build a machine that looks and acts like a helicopter, but it’s a lot easier than making one that flies. It does take a lot of drive, thinking and skill to build even these models, but I won’t be truly impressed until I see a video of one taking off and landing.

“The trio, Mohamed Abdi Barkadle, Saed Abdi Jide and Abdi Farah Lidan said the purpose of their helicopter was to be used to fight fire in the city and surrounding area. They receive no major sponsors, financial nor material support from any one including the government, it is a three men vision and ingenuity.”

Now, the question is… Could we get the three (and the helicopter) to Maker Faire Africa in Nairobi this August?

Mr. Frederick Msiska

Of his inventions and what it took to make it so, he says “I looked around and I found that certain things were missing in my life so I studied very closely things that the government supplies. I made them myself through trial and error. I just kept trying, trying, and trying until they eventually worked.”

   

On the wall of the office of Frederick Msiska: a to-do list of things he plans to do -

'Zinchito Mu 2008' (Work in 2008)
- Kuzenga office (Build office)
- Kupanga Luso ( Make things with my skills)
- Kupanga Sipuleya (Make a sprayer)
- Kupanga fani (Make a fan)
- Kupanga magetsi (Make electricity)
- Bio-gas light

Frederick is also a “lead farmer” – a designation local government gives to thought leaders in agriculture in an area who give advice and direction on best farming practice and techniques. He is also known around his area as the “Doctor of crops” due to his farming expertise and adoption of every sustainable farming techniques he comes across.

    

Frederick on his farm / at his macademia tree nursery and with his self-made chemical sprayer

Mzamose Gondwe, who runs the blog African Science Heroes spoke to Mr Msisaki and was distraught to learn that he has taken apart his biogas toilet due to (unwarranted) fears about imprisionment after word came out to him about the travails of another rural inventor, Gabriel Kondesi. Gabriel who has invented a radio station using an old cassette player, Nokia cellphone, some electrical components and antennae. What he did not know was that the root reason behind this particular arrest was the running of a radio station without appropriate licensing, an ovresite that the licensing body, the Malawi Communication Regulatory Authority (MACRA) later fixed when the recognized Gabriel’s ingenuity and awarded him a license.

Mr. Msisaki is the picture of humility: when asked about his inventions and achievements, he presents the view that “… farmers do not contribute to national development, it is only those who are educated who contribute to development.” He story and achievements however are truly the epitome of what we profile here at AfriGadget with the focus that we have on the appropriate application of ingenious African technology in every day problem solving.

via African Science Heroes: Communicating science, the African way and Self Help Africa.

Avid readers may remember the Bamboo Bike project, so the idea of using Bamboo as an alternative and sustainable material isn’t that far fetched. In fact, we’re glad that someone took the initiative and ventured into this field with so many different products at the same time. Bamboo Magic, really. Make sure not to miss out the video!

“I had an opportunity to stop by the 2009 South West Regional Agro-Pastoral Show, an annual exhibition for local farmers and craftsmen, here in Limbe this afternoon. The event was held on a community field ringed by exhibition booths overflowing with every imaginable vegetable, fruit and live animal cultivated and raised in the southwest region of Cameroon. In addition, there were a number of innovators with homemade products and gadgets crafted from local materials.

Amid all the displays, one guy stood apart with some creations that can only be described as a near perfect marriage of form, function, green design and a borderline obsession with bamboo. Lekuama Ketuafor is the proprietor of Bamboo Magic, a one-man cottage industry he’s started to supplement his work as a teacher.

Using a set of simple hand tools, glue, varnish, skill and loads of patience, Lekuama finds ways of using bamboo—a ubiquitous, low-cost, renewable material—in ways many people have never imagined. Judging from the size of the crowd gathered around his booth, I suspect few Cameroonians had seen anything quite like Lekuama’s creations before.

Among the intricately decorated bamboo shoes [2], vest, palm wine calabash, cowboy hat, clocks and so on, I was immediately attracted to two incredibly cool electronics-related pieces: a bamboo covered Nokia phone and an attractive and functional laptop case. Here’s a video of Lekuama, dressed appropriately in head-to-toe bamboo wear, demonstrating these items:

The attention to detail on the laptop case is impressive, right down to the external USB port access, shoulder strap attachments, carry handle, magnetic clasps, internal elastic keeper strap and red felt lining. And how about that chic mobile phone?

Due to the time intensive nature of his craft, Lekuama makes these items for sale in very small quantities. However, his dream is to establish a training center where he can transfer his skills to young Cameroonians and build a community of artisan microentrepreneurs.”

Obviously, agricultural shows in Africa are a great resource for AfriGadgets.

The Ministry of Higher Education and Technology has organized a Robot Contest (RoboCon), between Kenyan Universities and middle level colleges. The regional competition is taking place today at the Kenya Polytechnic. Here are the first looks at the Robots from institutions taking part in the competition.

University of Nairobi Robot

Kiambu Institute of Science and Technology Robot

Nairobi Technical Trainin Institute Robot

Kenya Technical Training Institute Robot, The Winner

Machakos Institute of Technology (MIT) Robot

Some video will come soon…

For more information on RoboCon click here.

One of the cheapest form of transport in Kenya is the “Boda Boda” literally meaning “Border-to-border”, a bicycle ride from one countries boarder immigration offices through no-mans land to the immigration offices of the bordering country customs office.

This mode of transport is non discriminatory and is used by people of all walks of life. from school children, market goers, workers, business persons, etc. The popularity is partially due to the speed and convenience as one does not get stuck in traffic. In the Lake basin town of Kisumu there are estimated to be over 500,000 BodaBoda’s. In the whole county, in excess of 1,500,000

The BodaBoda rider normally works from as early as 4.30a.m. to as late as 10.00p.m. depending on security in the area. He relies greatly on his mobile phone for clients to call for his services. His peak cycling times are early morning, lunch hour and dusk as persons head home from school and work. Translates to 4 – 5 hours in total daily riding time.

Due to the lack of know how and the complexity of electronics, the lack of power storage (i.e. a battery, and the cost) the Cycle dynamo is only effective for charging items and lighting while he is riding. Also, due to space or lack of, cost, insecurity and theft, attaching “Hard” Solar panels to the bikes has never been a viable sustainable option.

However, with the introduction of the Flexible Panels I believe wearing the panels on his back eliminates all these constraints. It also means he is generating power from sun-up to sun-down, an average of 12 hours a day.

Attaching the flexible panels on his back ensures:

1. His phone is always charged guaranteeing customer accessibility
2. He has light at home from the LED’s so saves on heavy power bills
3. He always has an emergency light with his – LED
4. The panels will not get stolen
5. One can also offer charging facilities to client being carried

Other users
The BodaBoda is not the only potential user of the Flexible Panel by wearing it. Anyone spending long hour’s outdoors is a candidate. The farmer, fisherman, hawker’s and peddlers, city council outdoor workers, tourists, campers and hikers – just to mention a few.

Attaching the Panel
It can be attached in a variety of ways. Velcro, Pop Buttons or simply attach Rucksack like straps so it can be worn with any garment. In the latter case the small pouch containing the controller and battery is attached to the back of the panels with Velcro.

If you would like to get in touch with Dominic, you can reach him at dwanjihia@yahoo.com or by phone at +254722700530

Today he has announced a new project called Green Erg, which harnesses (literally) a person’s movement energy to create electricity.

“This is basically a dynamo which is being driven as a result of friction between the ground and the blocks. The small yellowish blocks (these are covered by rubber in the real commercial product) rotate as you pull it. They are designed to rotate even on bumpy run even roads. We have tested it on moist lawn and have worked. It is very smooth so much that you basically don’t feel any disturbance as
you move along.

At normal walking speeds we have gotten more than 2 watts which is more than enough for running cell phones or radios. I envision that people will attach this to themselves and walk with it – or even attach it to an ox-cart, a skating board, bike, etc.”

Simon owns and runs CraftSkills, a small business based in Nairobi, Kenya that focuses on designing and building self-sustaining renewable energy projects in places not accessible to the electric grid. Craftskills had to date undertaken challenging projects in Kenya, Uganda, Tanzania, Cameroon and Rwanda among other places. Simon, whom AfriGadget first got to meet last summer at TED Global in Arusha, Tanzania, graciously agreed to conduct an email interview with AfriGadget.

AfriGadget: Could you tell us when and how Craft Skills got into the business of renewable energy in East Africa and the inspiration behind the organization?

Simon: CRAFTSKILLS was found in the year 2000 by myself. I was inspired by a challenge from my rural home where we have not had power for the last 40 plus years since [Kenya's] independence [in 1963]. I come from a hill side village in Sagalla, Taita Hills in Coast Province where we receive quite some strong wind from the Nyika Plateau. This wind passes through without being tapped and sometimes our roofs can not stand in its way.

I started talking to people about wind turbines and how I can get an affordable one which I can make and produce for other needy people. When darkness falls in these villages plus the fog it is virtually impossible to travel the terrain at night.

AfriGadget: Tell us a little about the people behind Craft Skills and the staff who work for the organization.

Simon: I started with two workers. I could not afford to hire trained people so I decided to train myself first then train my two boys. Then I got a friend who repairs radios and TVs in Kibera to help me design and put together a charge controller.

Now we have a team of 20 people and other partners out there in the field with their staff totaling 50. We have technicians, welders fitters, fiberglass experts and engineers and sales people.

AfriGadget: What is the typical profile of a Craft Skills project? Who is your typical client and how are the projects typically executed?

Simon: Most of our clients are not the owners of the projects we put up. They benefit from the battery charging services in the wind/solar sites we put up with our partners. The low income earners who cannot afford grid power or are in settlements where grid power is unavailable. We take both to do the sites ourselves involving the people on the ground as partners. Others are home owners who have invested a lot on building good homes in non grid areas – these put up turbines for their own use like lighting, and pumping water from wells and boreholes. The other segment is the business people I market areas where there is no grid who put up turbines to run charging centres and sell power to other shops or run their off-grid businesses like lodges and hotels, schools and other institutions.

AfriGadget: Can you share with our readers some of the challenges that Craft Skills faces in executing your projects?

Simon: We have faced cultural challenges where we cannot put a turbine on the most ideal site due to beliefs on such sites hence we have to educate the citizens to allow us to do so or redesign the project and relocate. Another is the financial capability of the citizens we find in these off grid areas.

[As a result of this] we have designed low power product (battery bundles and LED lights) to reach them so that they can be counted as beneficiaries of this new technology.

AfriGadget: Why renewable energy? What is the rationale behind Craft Skills’ exclusive focus on projects that produce energy from renewable sources.

Simon: We were looking for something which is affordable and sustainable and cuts across the economic sectors. Solar was proving to be more expensive, delicate, sophisticated and easily stolen when installed on ones home. We needed to sell people more power at a cheaper rate hence wind was the best candidate.

Wind is everywhere just like solar – one needs to get the right spot to put the turbine as high as they can. Its 24 hrs (Day and Night) and we found a cheap way we could make our turbines take advantage of low wind situations with the multi-pole generator, hollow blades for the propeller, with 90 per cent locally available materials making our technology the best application for this region.

AfriGadget: Which would you say has been the most satisfying/gratifying project that you have been involved with at Craft Skills? What was so special to you about this particular project?

Simon: The Chifiri water pan project to me is most gratifying. This settlement is all arid land pastoral community. The demand for water for drinking washing and watering the thousands of livestock is enormous.

Our turbine provided a cheaper solution for water and lighting the “manyattas” around the water pan. The contractor on the ground is excellent on his construction of the earth dams. His design impressed me that water was going to be available for over 6 months instead of the normal 4 months after the rainy seasons. He made sure the dams were well compacted and fenced to avoid animals hoofing inside the dam – increasing the rate of percolation and lose of water in the ground. Water is only available at the kiosks which are piped and placed near the settlements. The project provides water troughs for the animals to drink from and bathrooms for the people to clean themselves in. Within the fenced dam there is an armed home guard or caretaker manning the place with a security light up the tower hoisting the turbine.

Simon was also interviewed by Juliana Chebet aka AfroMusing, a Senior Editor at AfriGadget on CraftSkills. You can find the video at this link.